Prepregs
Lavender Composites is the Australian distributor for Delta-Preg, a world leader in the advanced composites industry for more than 25 years. We supply a comprehensive range of epoxy and cyanate ester prepregs tailored to meet customers’ specific applications.
In addition to our own technical staff, customers have access to Delta-Preg’s dedicated Technical and R&D department.
We carry a comprehensive range of prepregs in stock and can easily supply special materials (for example, Ceramic Matrix Composites) to meet your specific requirements at short lead times.
For customers new to prepregs, Lavender Composites offers on-site technical assistance and training to demonstrate the techniques involved in the lay up of these materials.
Further information on prepregs and techniques used to fabricate components using these materials can be found in the technical reference section.
Download Prepregs Stock List PDF
| PREPREG STOCK LIST | |||
| LOW TEMPERATURE CURING – DT806R | |||
| A versatile epoxy resin system designed for both component and tooling manufacture. The system offers an outstanding vacuum-only processing capability for the widest scope of reinforcement formats. | |||
| - Flexible curing capability: 65-130°C | |||
| - 21 days out life at 21°C | |||
| - 12 months freezer storage life | |||
| - Excellent handling and processing characteristics | |||
| Product Code | Fabric Style | Roll Width | Resin Content |
| CARBON FABRIC | |||
| GG200T(T300)-DT806R-42 ME (H 125 cm) | 199gsm 2/2 Twill Carbon (3K) | 1250mm | 42% |
| GG380T(T700)-DT806R-42 (H 125 cm) | 380gsm 2/2 Twill Carbon (12K) | 1250mm | 42% |
| GG400X(T700)-DT806R-37 (H 127 cm) | 400gsm ±45° Biaxial Carbon (12K) | 1270mm | 37% |
| GG630T-DT806R-37 (H 125 cm) | 630gsm 2/2 Twill Carbon (12K) | 1250mm | 37% |
| CARBON UD | |||
| T700-200-DT806R-36 EF (H 60 cm) | 200gsm HS Uni Directional Carbon | 600mm | 36% |
| T700-400-DT806R-36 EF (H 60 cm) | 400gsm HS Uni Directional Carbon | 600mm | 36% |
| ARAMID | |||
| AA284-DT806R-50 (H 120 cm) | 170gsm 2/2 Twill Aramid | 1200mm | 50% |
| E-GLASS | |||
| VV290T-DT806R-40 (H 127 cm) | 290gsm 2/2 Twill E-Glass | 1270mm | 40% |
| VV300S(7581)-DT806RN2-38 (H 127 cm) | 300gsm 8 Harness Satin E-Glass | 1270mm | 38% |
| VV600X-DT806R-35 (H 127 cm) | 602gsm ±45° Biaxial E-Glass | 1270mm | 35% |
| SYNTACTIC PLY | |||
| NP200N-DT806R-70 (H 115 cm) | 200gsm Syntactic Ply | 1150mm | 70% |
| SURFACING FILMS - SURFACE IMPROVEMENT - FS011 ABRASION RESISTANT - DT132RA | |||
| FS011 is a grey surface improvement film which moulds to a tough, sandable, paint-ready surface directly from the tool. The material offers a flexible curing capability between 80 and 135°C and is ideal for Out-of-Autoclave (OoA) processing. | |||
| Product Code | Fabric Style | Roll Width | Resin Content |
| FS011-200-20-1260 G | 200gsm Surfacing Film / 20gsm Polyester Veil | 1260mm | N/A |
| DT132RA is an epoxy resin film containing abrasion resistant fillers which can be co-cured with standard component prepregs. The material offers a flexible curing capability between 80 and 135°C. | |||
| Product Code | Fabric Style | Roll Width | Resin Content |
| DT132RA-300-24-600 G | 300gsm Abrasion Resistant Film / 24gsm E-Glass Cloth Carrier | 600mm | N/A |
| CARBON SURFACING – VTF261 | |||
| VTF261 standard lightweight surfacing materials are formatted to ensure a high quality, fault-free surface finish on vacuum-bag or autoclave moulded components. The material offers a flexible curing capability between 65 and 120C and is ideal for clear cosmetic finish components. | |||
| Product Code | Fabric Style | Roll Width | Resin Content |
| VTF261-38%-1KHS-P-120-1000 DC | 120gsm Plain Weave Carbon (1K) | 1000mm | 38% |
| VTF261/CF3200-DC | 245gsm 2/2 Twill Carbon (3K) | 1250mm | 40% |
| FLAME RETARDENT, SELF EXTINGUISHING – FR147FA / FR150N | |||
| FR147FA transparent, halogen free fire retardant system. Meets FAR25.853, App. F, Part I (Flammability) and Part V (Smoke) Requirements as well as Boeing BSS 7239 Toxicity Requirements FR150N black pigmented, halogen free fire retardant system. Meets FAR 25.853, App. F, Part I (Flammability) and Part V (Smoke) requirements as well as ABD 0031 Toxicity requirements. Classified as UL 94 – V1. | |||
| Product Code | Fabric Style | Roll Width | Resin Content |
| CARBON FABRIC | |||
| GG200T(T300)-FR147FA-42 ME (H 125 cm) | 199gsm 2/2 Twill Carbon (3K) | 1250MM | 42% |
| E-GLASS | |||
| VV300S-FR150N-40 ME (H 127 cm) | 300gsm 8 Harness Satin E-Glass | 1270mm | 40% |
| HIGH TEMPERATURE - DT195N | |||
| A high performance toughened epoxy resin system exhibiting excellent ambient and high temperature mechanical properties combined with good impact resistance. The system can be used at temperatures up to 170º° C after a suitable cure. It can be cured between 75º° C and 135ºC,° and processed using autoclave, vac bag, or press cures. Maximum Tg of 195 ºC. | |||
| Product Code | Fabric Style | Roll Width | Resin Content |
| CARBON FABRIC | |||
| GG200T(T300)-DT195N-45 MS (H 125 cm) | 199gsm 2/2 Twill Carbon (3K) | 1250mm | 45% |
| GG630T(T700)-DT195N-37 (H 125 cm) | 630gsm 2/2 Twill Carbon (12K) | 1250mm | 37% |
| ZYLON FABRIC | |||
| (non-stock but readily available) | |||
| ZZ300T-DT195N-42 MS (H 125 cm) | 300gsm 2/2 Twill Zylon | 1250mm | 42% |
| HIGH TEMPERATURE - DT197N | |||
| An evolution on DT195N, slightly tougher and higher Tg. Maximum Tg of 200ºC. | |||
| Product Code | Fabric Style | Roll Width | Resin Content |
| CARBON FABRIC | |||
| GG200T(HTA)-DT197N-42 ME (H 125 cm) | 199gsm 2/2 Twill Carbon (12K) | 1250mm | 42% |
| GG380T(T700)-DT197N-38 ME (H 125cm) | 380gsm 2/2 Twill Carbon (12K) | 1250mm | 38% |
| CARBON UD | |||
| T700-200-DT197N-36 EF (H 60 cm) | 200gsm HS Uni Directional Carbon | 600mm | 36% |
| ARAMID | |||
| AA284-DT197N-47 ME (H 120 cm) | 170gsm 2/2 Twill Aramid | 1200mm | 47% |
| AA900S-DT197N-45 ME (H 120 cm) | 335gsm 5 Harness Satin Weave Aramid | 1200mm | 45% |
| E-GLASS | |||
| VV105S-DT197N-45 ME (H 112cm) | 105gsm 4 Harness Satin E-Glass | 1120mm | 45% |
| S2-GLASS | |||
| VV300S(S2)-DT197N-35 ME S932 (H 127 cm) RL25 | 300gsm 8 Harness Satin S2-Glass | 1270mm | 35% |
| ULTRA HIGH TEMPERATURE (CYANATE ESTER) – DT01CN | |||
| DT01CN is a high performance cyanate ester system, with a maximum Tg above 350ºC. For use on components with service temperatures up to 250ºC. Resistance to outgassing for space applications. Low dielectric constant and low dissipation factor. Inherently flame retardant. The material offers a flexible curing capability between 85 and 150ºC. | |||
| Product Code | Fabric Style | Roll Width | Resin Content |
| CARBON FABRIC | |||
| GG200T(HTA)-DT01CN-42 (H 125 cm) | 199gsm 2/2 Twill Carbon (3K) | 1250mm | 42% |
| ULTRA HIGH TEMPERATURE CERAMIC MATRIX COMPOSITES (CMC) | |||
| Light weight ceramic matrix composite (CMC) prepreg, with up to 900ºC operation temperature for aviation and aviation related applications. | |||
| Product Code | Fabric Style | Roll Width | |
| SiO2 FABRIC | |||
| SB1F1N-S620-B400 | 620gsm Satin Weave SiO2 | 400mm | |
| HOT PRESS MOULDING – DT130EN | |||
| DT130EN is a press moulding system with controlled flow and extended out-life. It can be press moulded between 135°ºC (30 mins) and 150ºC° (10 min) or autoclave cured. Black pigmented resin. | |||
| Product Code | Fabric Style | Roll Width | Resin Content |
| CARBON FABRIC | |||
| GG200T(AS4C)-DT130EN-42 ME (H 125 cm) | 199gsm 2/2 Twill Carbon (3K) | 1250mm | 42% |
| TOUGHENED EPOXY ADHESIVE FILM – FA010 | |||
| FA010 is a black pigmented toughened epoxy adhesive film. It offers a versatile 80-120°C curing film adhesive suitable for bonding both aluminium and composite substrates either to themselves or to honeycomb core materials. | |||
| Product Code | Fabric Style | Roll Width | Resin Content |
| FA010-150-600 | 150gsm Adhesive Film / No Carrier | 600mm | N/A |
| FA010-150-E24-600 | 240gsm Adhesive Film / 24gsmPolyester Mat Carrier | 600mm | N/A |
| PRE-FORMED EDGING SYSTEM - KORDO | |||
| AX003 is a versatile 65-140°C curing film adhesive suitable for bonding both aluminium and composite substrates either to themselves or to honeycomb core materials. Unpigmented, the film will not leach through the surface layer of the laminate and cause discolouration. A black pigmented version is available also. | |||
| Product Code | Fabric Style | Roll Width | Resin Content |
| KORDO 3C-200-DT806R | PET Inner Braid with 200gsm HS +-45 Biax Carbon Outer. Edge Thickness: 3mm | 50m | N/A |
| Note: The user will determine the suitability for use of these products. The recommendations / data given above are based on information we believe to be accurate. They are intended to be used only as a guide for selection for end-use evaluation and do not constitute a product specification. Lavender CE cannot assume responsibility for results obtained by use of these products as we have no control over end-use applications or handling. Lavender CE therefore specifically disclaims any damage or loss of any kind in relation to the use of these products. |
Download Prepregs Stock List PDF